Home / All / 1U DIGITAL AMPLIFIER / 2 Ohms Stable Amplifier /

Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000

Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000

Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000
Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000Sinbosen 2 ohm stable 4760 watts 4CH class d digital high power amplifier D4-2000
Categories2 Ohms Stable Amplifier
BrandSinbosen| Audio sound system manufacturer
ModelD4-2000
2Ω Output power4CHx4760W
4Ω Output power4CHx3400W
8Ω Output power4CHx2000W
8Ω Bridge power2CHx6800W
4Ω Bridge power2CHx9520W
Voltage90V-270V
Warranty3 Years
Minimum load impedanceStereo 2Ω
TypeDigital amplifier
Feature12 ohms stable amplifier
Feature21u digital amplifier
Channels4 channels power amplifier
ClassClass d power amplifier
Special serviceOEM service offered
Terms of PaymentWestern Union, T/T, Paypal
Update TimeMar 29,2024
Detail Information
D4-2000 power amplifier
1U Amplifier

D4-2000

 Rated Output Power(THD+N=1%, 1kHz continue sine wave, all channel driving)

8Ω/Stereo

4x2000W

4Ω/Stereo

4x3400W

2Ω/Stereo

4x4760W

16Ω/Bridge

2x4000W

8Ω/Bridge

2x6800W

4Ω/Bridge

2x9520W

 Bridge RMS voltage(THD+N=1%, 1kHz)

126.5V

 Slew rate(1kHZ, low-pass filter bypassed)

50V/us

 Sensitivity(Rated Power,1kHz)

selectable

41dB
38dB
35dB
32dB

selectable
38dB
35dB
32dB
29dB

 THD+N(10%Rated Power,typical)

 0.01% 
 IMD-SMPTE(10%Rated Power,typical) 0.01% 
 DIM30(10%Rated Power,typical) 0.01% 
 Cross-talk(20Hz-1kHz,below Rated Power) ≥90dB
 Frequency response(10% Rated Power,20Hz-20kHz,8Ω ±0.2dB
 Input impedance 20kΩ (Balance),10kΩ(Unbalance)
 Damp factor(8Ω,20Hz-200Hz ≥5000

 SNR(A weighted 20Hz-22kHz)

 ≥112dB

 Main power

 90~260VAC,50~60Hz
 Protection Under voltage, DC, Over temperature,Over load  limiter,Short protection

 Size(WxHxD)

 483x44x465mm
 Net weight 12kg
PROFESSIONAL POWER AMPLIFIER

1 Performance overview
a,High efficiency and energy saving, operation cost is low,
b,Compact and light weight,structure is firm.
c,Comply with the safety and EMC standards.
d,90~260VAC / 50~60HZ Wide range power supply.
e,First-class quality, thanks for the components from international high-end manufacturers.
f,Temperature control fan for quiet operation.
g,Modular design and maintenance is convenient.
h,Very suitable for mobile show.
i, Reasonable design makes you feel relaxed in the process of using.

2 Environmental protection, energy saving, cost saving

Advantages of high efficiency:
* Low working temperature, rlability will be improved obviously.
* The size and weight are only 1/3 of tradition amplifier.
" The cost for transportation, handling, installation will reduce obviously.
* Saving energy, reducing operating costs
* Environmental protection

3. Cooling instructions: Good heat dissipation /High quality fans
The cooling mode of the equipment is as follows: the cold air is sucked through the ventilation hole of the front panel, and the heat is taken out from the rear panel.
2 ohm stable amplifier
2 ohm stable amp
best 2 ohm stable amp
high power amplifier 2 ohm stable
2 ohm stable 2 channel amp

Review
  • Loading...
Please send your message to us
*Email
*Name
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.