Home > FAQ > FAQ about Power Amplifier >

5 minutes , tell you how to Connect the Equipment Of The Sound System

5 minutes , tell you how to Connect the Equipment Of The Sound System

Update Time:2020-02-09
Equipment connection sequence
1. BASS SYSTEM DEVICE CONNECTION:

Mixing Console(1-2 Grouping)→Equalizer →Crossover→Compressor/Limiter→Subwoofer Amplifier→Subwoofer Box
2. AUXILIARY SOUND SYSTEM EQUIPMENT CONNECTION:

Mixing Console(3-4 Grouping)→Equalizer →Delay (Optional)→Compressor/Limiter→Auxiliary Speaker Power Amplifier → Auxiliary Speaker
3. Main Sound System Equipment Connection

Mixing Console (L-R Main Channel)→ Equalizer → Actuator (Optional)→ Feedback Exterminator (Optional)→ Compressor/Limiter → Main Speaker Amplifier → Main Speaker.
4. Monitor System Device Connection Order:

Mixing Console (Aux Output)→ Equalizer → Compressor/Limiter → Studio Monitor Amplifier →Studio Monitors Amplifier → Studio Monitor Amplifier →Studio Monitors.
The simplest system
1. COMPONENTS:

Sound Source Equipment, Mixing Console, Effect, Amplifier, Full-Frequency Speaker
2. How to connect

Sound Source Equipment-Mixing Console-Power Amplifier-Speakers, Chain Connection between Equipment.

Chain connection: The way the front device OUTPUT (OUT or OUTPUT) is connected to the back device INPUT (IN or INPUT) .
3. Device interfaces

The interface of professional equipment, whether it is a XLR or other socket, will be connected in a balanced manner using XLR or a 3-core connector. The sound source device such as a CD player that uses RCA socket for output signal, couble be connected with a RCA-to-2-core cable into the LINE IN socket 
of mixing console .

The IN port of the effect is connected to the POST AUX SEND port of the mixer fader (the fader output of some mixer is indicated by FX or EFX), and the effect OUT is connected to the mixer LINE IN.