Notice! The new DSP touch screen power amplifier is coming soon! Are you ready?
1.48kHz sampling frequency DSP processor, 24-bit A/D and D/A conversion; 4 inputs and 4 outputs DSP module.
2. The input mode can choose analog input, AES digital signal input, and DANTE input. Different signals can be input at the same time. It is equipped with an automatic switch and can set the signal priority.
3. The output channel temperature is visually displayed on the display screen, and the temperature status of the power amplifier can be monitored at any time.
4. Output amplifier protection indicator light, the PRO indicator light is always on when the amplifier is in protection state.
5. Quick copy function; copy the adjusted parameters to other channels.
6. Configure signal generator; white noise; pink noise; sine wave signal.
7. Scan USB devices and network port devices with one click, and automatically connect after scanning the device; the network port can be debugged with multiple machines, and up to 250 devices can be online at the same time.
8.2U panel is equipped with a 4.3-inch touch screen (the 1U panel is equipped with a 2-inch color screen), which can directly adjust the parameters to be adjusted by touch or connect to a computer to control through PC control software, which is very convenient, intuitive and simple;
9. The operation panel can store 30 kinds of user programs, which can be called quickly and conveniently.
10. The device can be locked through software or panel to prevent misoperation.
This DSP processor is a continuation and improvement of the old DSP processor, with a 4.3-inch touch screen and software control. Input configuration limiter, noise gate, delay, phase, high and low pass, input joint adjustment, channel parameter copy, mute and other functions. Output configuration limiter, delay, phase, high and low pass, output joint adjustment, channel parameters, mute, FIR and other functions. The DSP function is more powerful and the operation is more convenient.
|
Technical Parameters: |
|||||
analogue input | 4 x XLR balanced | ||||
analogue output | 4 x XLR balanced | ||||
digital input | 1 x AES/EBU; 0dBFs=+21dBu | ||||
THD+N distortion | ≤0.005 @1kHz 20dBu；≤0.004 @1kHz 0dBu | ||||
|
signal to noise ratio |
>117dB |
||||
maximum input level | >20 dBu | ||||
|
maximum output level |
>14 dBu |
||||
|
frequency response |
20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz |
||||
|
DSP processing |
|||||
parametric equalizer | Input with 7-band parametric equalization | ||||
Output with 7-band parametric equalization | |||||
automatic phase correction FIR | Asymmetry,512Taps, automaticphase correction FIR, perfectly compatible with third-party application software | ||||
equalizer type | All equalization filters can be set to LOW PASS Filter; High Pass Filter; PEQ; All Pass | ||||
equalizer gain | Range: -15dB ~+15dB, step accuracy: 0.1dB | ||||
central frequency | Adjustable with 1Hz step accuracy within the frequency band of 20Hz~20kHz | ||||
Q value/broadband | The Q value range is: 0.3~15, the step is 0.1 | ||||
Input & output gain | Range: -12dB~+12dB, step accuracy: 0.1dB | ||||
High and low pass filtering of IIR frequency division part | Butterworth slope 12/24/48 dB selectable Bessel slope 12/24/48 dB optional Linkwitz-Riley slope 12/24/48 dB selectable | ||||
|
High-pass/low-pass/band-pass filters for the FIR crossover section |
Type: High-pass/low-pass/band-pass filter optional Taps range: 256 ~ 512, Minimum attenuation to -120dB Time window type: Rect/Sinc/Keiser/Hanning/Hamming/Blackman/Nuttal/Sine optional |
||||
|
Output peak pressure limit |
Threshold range: 20dBu~-10dBu Start control time: 0.1ms~900ms; Release time: 0.04s~6s |
||||
Noise level | -90 dBu | ||||
Sitio web: http://www.sinbosen.com/
Whatsapp: https://api.whatsapp.com/send?l=en&phone=8613342806188
Facebook: https://www.facebook.com/sinbosenamplifier/
Correg electronico: sales7@sinbosen.com
