Sinbosen FP10000Q: One FP10000q amplifier can use with 4 pcs Dual 15-inch speaker


FP10000Q some materials information as follow:
1. Extended 34mm heatsink, longer and thicker.
2. High-quality Blue amplifier board.
3. Use original "Sanken" and "Fairchild" transistor.
4. Use high-quality fans from Taiwan.
5. Use original "Siemens" capacitors.
- 10pcs 3300uf/200V
- 4pcs 1800uf/200V
6. Use Switzerland XLR Brand -- Neutrik




FP10000Q SPECIFICATIONS:
8 ohms Stereo Power: 4x1350W
4 ohms Stereo Power: 4x2100W
8ohms Bridged Power: 2x4200W
4ohms Bridged Power: 2x5000W
Frequency Response(+0/-0.3dB,1W/8Ω): 20 Hz - 34 kHz
THD 20 Hz - 20 kHz for 1 W: <0.1%
Signal-to-Noise Ratio: >112 dBA
Channel separation (Crosstalk) at 1 kHz: >70 dB
Input Connectors (per channel): 3-pin XLR, electronically balanced
Output Connectors (per channel): Binding Posts 2-pole
TourClass Protection: ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush,sub/ultrasonic input
Operating voltage, 230 V / 115 V nominal: 130-265 V / 65-135V selectable
Voltage Gain(dB): 23, 26, 29, 32, 35, 38, 41, 44 dB selectable
Input impedance: 20 kOhm
Level adjustment (per ch.): Front-panel potentiometer, 31 position detented from -inf to 0 dB
Dimensions (W*H*L): 88mmX483mm×396mm
Packing dimension (W*H*L): 180mmX560mm×500mm
Net weight: 12.5kg
Gross weight: 14.5kg
Sinbosen FP10000Q Feedbacks:
 |  |  |
Hold 6000 People Party in the Netherlands | The Rock Festival In San Luis Potosí, Mexico | Festival brassicole trois rivières in Canada |

Must know before buying:
Full-range speaker [line array speaker, professional speaker]: the power of the power amplifier should be greater than 1.5 times or more;
Subwoofer speaker: The power of the amplifier should be more than 2 times or more, because the current of the low frequency speaker is larger than that of the full frequency speaker!