Home / All / FP POWER AMPLIFIER / Amplifier For Subwoofer /

Sinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bass

Sinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bass

Sinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bass
Sinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bassSinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bassSinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bassSinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bassSinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bass
CategoriesAmplifier For Subwoofer
BrandSinbosen| Audio sound system manufacturer
ModelFP 14000
Channels2 channel power amplifier
TypeProfessional Power Amplifier
8Ω Output Power2400WX2CH
4Ω Output Power4400WX2CH
ColorBlack, Blue
CertificationCE, ROHS, TUV
ClassTD
Warranty3 Years
Capacitors3300uf/200V
Special serviceOEM service offered
ForDual 18 inch subwoofer
ApplicationKaraoke/KTV/Cinema/Church/Stage/Concert/DJ
FOB portGuangzhou
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal
Update TimeDec 2,2023
Detail Information

Sinbosen high power 4400w 2 channel lab FP14000 amplifier for dual 18-inch bass

One FP 14000 switch high power amplifier can use with 2 pcs Dual 18 inch speaker 

  

 

 

 

FP14000 SPECIFICATIONS


8 ohms Stereo Power: 2x2400W

4 ohms Stereo Power: 2x4400W

8 ohms Bridged Power: 8800W

4 ohms Bridged Power: 14000W

Frequency Response(+0/-0.3dB,1W/8Ω): 20 Hz - 34 kHz

THD 20 Hz - 20 kHz for 1 W: <0.1%

Signal-to-Noise Ratio: >112 dBA

Channel separation (Crosstalk) at 1 kHz: >70 dB

Input Connectors (per channel): 3-pin XLR, electronically balanced

Output Connectors (per channel): Binding Posts 2-pole

TourClass Protection: ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush,sub/ultrasonic input

Operating voltage, 230 V / 115 V nominal: 130-265 V / 65-135V selectable

Voltage Gain(dB): 23, 26, 29, 32, 35, 38, 41, 44 dB selectable

Input impedance: 20 kOhm

Level adjustment (per ch.): Front-panel potentiometer, 31 position detented from -inf to 0 dB




Newly upgraded version FP14000 amplifier details


1. Longer heatsink +30mm, so now 94mm!

2. Use original "Siemens" capacitors.

- 12pcs 3300uf/200V (+2 pcs more than the old version)

- 4pcs 2200uf/200V

3. High-quality Blue amplifier board.

4. Use original "Sanken" and "Fairchild" transistor.

5. Use high-quality fans from Taiwan.

6. Use Switzerland XLR Brand -- Neutrik.




FP 14000 Power Amplifier Feedback and Video 



Use FP14000 For 6000 People Party in the NetherlandsUse FP14000 At The Rock Festival In San Luis Potosí, MexicoFP14000 Used For Canada Brassicole Trois Rivieres Festival




Must know before buying:

Full-range speaker [line array speaker, professional speaker]: the power of the power amplifier should be greater than 1.5 times or more;

Subwoofer speaker: The power of the amplifier should be more than 2 times or more, because the current of the low frequency speaker is larger than that of the full frequency speaker!

keywords

fp14000

fp14000 amplifier

sinbosen fp14000

fp14000 power amp

fp 14000


Review
  • Loading...
Please send your message to us
*Email
*Name
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.